Vous êtes ici
HP 2620-24-PoE+ Switch
The HP 2620 Switch Series consists of five switches with 10/100 connectivity.
The HP 2620-24 Switch is a fanless switch with quiet operation, making it ideal for deployments in open spaces.
The HP 2620-24-PPoE+ Switch, HP 2620-24-PoE+ Switch, and HP 2620-48-PoE+ Switch are IEEE 802.3af- and IEEE 802.3at-compliant switches and provide up to 30 W per powered port. The HP 2620-48 Switch has variable speed fans for quiet operation.
All 2620 series switches include two 10/100/1000BASE-T ports and two SFP slots for Gigabit Ethernet uplink connectivity.
An optional redundant external power supply is also available to provide redundancy in the event of a power supply failure.
With IPv4/IPv6 static and RIP routing, robust security and management features, free lifetime warranty, and free software updates, the HP 2620 Switch Series is a cost-effective solution for customers who are building converged enterprise edge networks.
- Cost-effective access layer switches
- Lite Layer 3 IPv4/IPv6 static and RIP routing
- 30 W PoE+ support on PoE models
- Gigabit fiber uplinks
- Enterprise-class features
|24 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+)|
|Media Type: Auto-MDIX|
|Duplex: half or full|
|1 RJ-45 serial console port|
|2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)|
|Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only|
|2 open mini-GBIC (SFP) slots|
|Dimensions||14.5(d) x 17.44(w) x 1.73(h) in. (36.83 x 44.3 x 4.39 cm) (1U height)|
|Weight||10.67 lb. (4.84 kg), Fully loaded|
|Memory and processor|
|Processor||Power PC FreeScale 8313 @ 400 MHz, 512 MB flash, 512 MB SDRAM, 4 MB flash ROM; packet buffer size: 1 MB|
|Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only|
|IPv6 Ready Certified|
|100 Mb Latency||< 8.3 µs (LIFO)|
|1000 Mb Latency||< 2.9 µs (LIFO)|
|Throughput||up to 9.5 million pps|
|Routing/Switching capacity||12.8 Gbps|
|MAC address table size||16000 entries|
|Operating temperature||32°F to 131°F (0°C to 55°C)|
|Operating relative humidity||15% to 95% @ 104°F (40°C), noncondensing|
|Nonoperating/Storage temperature||-40°F to 158°F (-40°C to 70°C)|
|Nonoperating/Storage relative humidity||15% to 90% @ 149°F (65°C), noncondensing|
|Altitude||up to 10,000 ft. (3 km)|
|Acoustic||Power: 34.0 dB, Pressure: 29.7 dB|
|Achieved Miercom Certified Green Award|
|Idle power||22.8 W|
|Maximum power rating||428.0 W|
|PoE power||382 W|
|Notes||Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS).|
|EN 60950/IEC 60950CAN/CSA 22.2 No. 60950EN 60825UL 60950|